Cetronic Power Solutions Blog Posts

The NetMan 204 network agent allows UPS directly connected over LAN 10/100 Mb connections to be managed using the main network communication protocols. It was developed to integrate UPS into medium-sized and large networks, to provide a high level of reliability in communication between the UPS and associated management systems. This network agent acts as a bridge between the UPS and the user's network […]

The MultiCOM 401 connects a UPS to a Profibus DP Network. In industrial environments, the Gateway integrates UPS management and monitoring into a control system. The Gateway uses the field bus design – one of the most popular used for communicating between devices such as automation control systems and distribted I/O hardware. What is the […]

MultiCOM 382 provides a set of relay contacts to provide UPS alarm and status indication. The contacts are connected through terminal connections. Signal contacts include Emergency Power Off (EPO), Remote Shut Down (RSD), On Battery, On Bypass, Alarm and Low battery. The contacts are change over or normally open, rated at 230V, 3A. The Multicom […]

MultiCOM 372 provides a UPS with an additional RS232 serial interface port. The card has Emergency Power Off (EPO) and Remote Shut Down (RSD) inputs with terminal connections. The Multicom 372 Serial/EPO (Emergency Power Off) Port is a versatile and crucial component designed to enhance the functionality and safety features of power management systems. This […]

The MultiCom 351/352 is a serial duplexer that allows two devices to be connected to a single serial port on a UPS. It can be used where numerous serial connections and multiple polling of UPS are required, and is ideal for LAN networks with a firewall. The MultiCOM 351/352 Serial Link Duplexer is an efficient […]

The MultiCOM 301/302 protocol converter may be used to monitor the UPS using the MODBUS/JBUS protocol on RS485 or RS232 serial line. It will also manage a second, independent RS232 serial line that can be used to connect other devices such as the Netman 101 or a PC that uses the PowerShield³ software The MultiCOM […]

The environmental sensors monitor and record environmental conditions as well as activities in protected areas and at the premises where the UPS is installed. The environmental sensors allow extensive control and management of the environment around the UPS by monitoring the temperature, humidity, triggering devices such as fans or locks and communicating the values via […]

PowerNETGuard software centralises UPS management using network interface (SNMP) communications. It is ideal for Data Centre managers and medium to large sized networks. PowerNETGuard uses the RFC1628 standard Management Information Base (MIB) and ensures standardised UPS management wherever they are located. The PowerNetGuard Supervision Software is a comprehensive and advanced solution for managing and monitoring […]

The remote alarm panel provides remote indication of UPS status. LED Panel: Provides audible and visual (LED) alarms. LCD Panel: Provide a detailed UPS status overview in real time. Can display values for UPS specific input and output supplies, and battery set measurements. The panel has a high-definition graphical display and can report in 7 […]